When you have a variety of different pumps across your site or across multiple sites, a comprehensive Proserv contract gives you the peace of mind that they are all maintained to a high standard.

Every pump and system requires its own specialist service from an expert. Our engineers are qualified and experienced in the maintenance of almost all of the following pump systems available in the UK:

  • Booster Sets
  • Pressurisation Sets
  • Foul/Storm Pump Stations
  • Heating Pumps

The work we carry out on each pump or system is detailed below.

Booster Sets

Booster Sets

  • Operate isolation valves and check functionality
  • Check operation of non-return valves
  • Check condition and pressures of pressure vessels
  • Check motor bearings using vibration meter·
  • Check mechanical seal for leaks
  • Physical check of control panel
    • Condition
    • Switches
    • Earthing
    • Cabling connections
  • Check motor electrical condition where possible
  • Check inverter faults where fitted/possible
  • Check condition of all pipework and manifolds
  • Check overall condition of system as a whole
  • Check fault communication with BMS system where fitted

Pressurisation Sets

Pressurisation Sets

  • Operate isolation valves and check functionality
  • Check operation of non-return valves
  • Check pressure switch operation – including high and low level cut-outs
  • Check mechanical seals for leaks
  • Check motor bearings using vibration meter
  • Physical check of control panel where possible
    • Condition
    • Switches
    • Earthing
    • Cabling connections
  • Check motor electrical condition where possible
  • Check condition and pressures of pressure vessels
  • Check correct operation of float valve
  • Check fault communication with BMS system where fitted

Foul/Storm Pump Stations

Foul/Storm Pump Stations

  • Operate isolation valves and check functionality
  • Check operation of non-return valves
  • Check pressure switch operation – including high and low level cut-outs
  • Check mechanical seals for leaks
  • Check motor bearings using vibration meter
  • Physical check of control panel where possible
    • Condition
    • Switches
    • Earthing
    • Cabling connections
  • Check motor electrical condition where possible
  • Check condition and pressures of pressure vessels
  • Check correct operation of float valve
  • Check fault communication with BMS system where fitted

Heating Pumps

Heating Pumps

  • Operate isolation valves and check functionality
  • Check operation of non-return valves
  • Check pressure switch operation – including high and low level cut-outs
  • Check mechanical seals for leaks
  • Check motor bearings using vibration meter
  • Physical check of control panel where possible
    • Condition
    • Switches
    • Earthing
    • Cabling connections
  • Check motor electrical condition where possible
  • Check condition and pressures of pressure vessels
  • Check correct operation of float valve
  • Check fault communication with BMS system where fitted

Accreditations & Affiliations

About Us

Mission
Our mission is: To create flow the way you need it

Vision
We are driven by our vision, where we see: A world where pump reliability is paramount.

We see ourselves: Satisfying the pump user through effective and efficient fluid management

 

Useful Links

Contact

01604 648 800
mail@durapump.co.uk

Dura Pump Ltd
Boughton Fair Lane
Moulton
Northants
NN3 7RT

Latest News

Submersible Pumps from Rotomec

Submersible Pumps from Rotomec   As far as solving pumping solutions go, submersible pumps are the tool for the job. Sometimes waterways or pumping systems...

Read more >

Save energy this summer: Are your systems running efficiently?

Save energy this summer: Are your systems running efficiently? With summer just around the corner, it’s important to think about a few more key things...

Read more >

© Copyright 2019 by Dura Pump. All rights reserved.