Submersible Pumps To Help Your Business

Grundfos – Submersible/Sump Pumps

Grundfos range covers drainage, effluent and sewage pumps for a wide range of applications in building services and industrial applications as well as transfer of raw sewage in municipal sewage systems.

Super Vortex and S Tube Impeller options

In built Auto adapt control function range

Dry well capabilities

Range covers sump to dewatering pumps

explore the full RANGE

explore the full benefits

A sump pump is a small submersible pump that is most commonly installed in the lowest part of premises such as a basement, cellar or plant room. The role of the sump pump system is to keep the area under the building dry or to prevent flooding.

Sump pumps work in conjunction with a sump pit or sump pump tank. This pit is built beneath the level that needs to remain dry, which is usually the floor level. Water or other waste liquids that may spill during a process will collect in the pit as it is channelled there and be pumped away to prevent flooding.

Options of low suction pumps, more commonly known as “puddle suckers”, for emptying shallow pits or spillages.

Small sump pumps are often very critical in many applications. A failed sump pump could mean a flooded factory floor, a flooded store or a flooded plant room. Often they are overlooked. However they are typically a cheap and quick install, that can save thousands.

Share this article

If you are looking for a strong and experienced full line supplier of wastewater products, look no further.

Grundfos’ trademark is to develop and produce highquality, energy efficient pumps for every area of the commercial buildings sector, and wastewater is no exception. Increasing urbanisation along with the demand for uncompromised comfort makes wastewater a key area to focus on for every professionally engaged planner, and Grundfos is there to help throughout the process. We offer pumps, lifting stations and pumping stations for:

Drainage water (including groundwater)
Rain and surface water
Grey water
Black water

UNILIFT CC Grundfos UNILIFT CC pumps are single-stage submersible pumps designed for pumping clean, non-aggressive water and slightly dirty (grey) wastewater. Capable of pumping down to 3 mm water level. The pumps have both a top and a side outlet allowing easy adaptation to existing pipework.	Specification Channel	Flow & Head Max Flow: 4.08l/s Max Head: 9.5m	Downloads unilift-cckp-ap-and-kpc-data-booklet
UNILIFT KP Grundfos UNILIFT KP are stainless-steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 10 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings.	Specification Channel	Flow & Head Max Flow: 3.89l/s Max Head: 9.7m	Downloads unilift-cckp-ap-and-kpc-data-booklet
AP AP pumps are designed for pumping wastewater, sludge-containing water, groundwater and sewage. APG are equipped with cutter system for grinding solids into small pieces.	Specification Grinder	Flow & Head Max Flow: 8.89l/s Max Head: 68m	Downloads ap-datasheet
UNILIFT AP12 Grundfos UNILIFT AP12 are stainless-steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 12 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings.	Specification Vortex	Flow & Head Max Flow: 8.17l/s Max Head: 18.28m	Downloads unilift-cckp-ap-and-kpc-data-booklet
UNILIFT AP35 Grundfos UNILIFT AP35 are stainless-steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 35 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings.	Specification Channel	Flow & Head Max Flow: 6.39l/s Max Head: 13m	Downloads unilift-cckp-ap-and-kpc-data-booklet
UNILIFT AP35B Grundfos UNILIFT AP35B are stainless-steel submersible pumps designed for pumping effluents (excluding toilet discharge), with particles up to 35 mm. The pump is suitable for installation on auto coupling, allowing for easy access to the pump for maintenance and other purposes.	Specification Vottex	Flow & Head Max Flow: 5.75l/s Max Head: 13m	Downloads unilift-cckp-ap-and-kpc-data-booklet
UNILIFT AP50 Grundfos UNILIFT AP50 are stainless-steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 50 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings	Specification Channel	Flow & Head Max Flow: 9.44l/s Max Head: 13m	Downloads unilift-cckp-ap-and-kpc-data-booklet
UNILIFT AP50B Grundfos UNILIFT AP50B are stainless-steel submersible pumps designed for pumping waste water, including toilet discharge (where allowed), with particles up to 50 mm. The pump is suitable for installation on auto coupling, allowing for easy access to the pump for maintenance and other purposes.	Specification Vortex	Flow & Head Max Flow: 8.17l/s Max Head: 18.28m	Downloads unilift-cckp-ap-and-kpc-data-booklet
SEG Submersible Grundfos SEG sewage grinder pumps (0.9-4 kW) are designed for pumping wastewater, sludge-containing water, and sewage. Fitted with a patented grinder system designed to grind the media.	Specification Grinder	Flow & Head Max Flow: 9.5l/s Max Head: 48.2m	Downloads seg-pump-data-booklet_
DP Submersible Grundfos Drainage Pumps (DP) cover a motor range of 0.9-2.6 kW. The pumps are fitted with a semi-open multi-vane impeller capable of handling solids up to 10 mm in size.	Specification Semi-open milti-vane	Flow & Head Max Flow: 13.6l/s Max Head: 25.1m	Downloads dp-datasheet
EF Grundfos EF pumps have a single-vane, semi-open impeller for 30 mm free passage, designed for pumping effluent and other liquids such as drainage and surface water with fibres and small impurities.	Specification Single-vane semi-open impellor	Flow & Head Max Flow: 12.2l/s Max Head: 22.5m	Downloads ef-pump_
SL Submersible Grundfos SL sewage pumps (1.1-11 kW) are fitted with either S-tubeÂ® (SL1) or SuperVortex impeller (SLV). The free passage through the pump varies from 50-100 mm depending on size.	Specification S- Tube	Flow & Head Max Flow: 83.3l/s Max Head: 46.3m	Downloads sl-pump-data-booklet
SE Submersible Grundfos SE sewage pumps (1.1-11 kW) are fitted with either S-tubeÂ® (SE1) or SuperVortex impeller (SEV). The free passage through the pump varies from 50-100 mm depending on size.	Specification S-tube and Super Vortex	Flow & Head Max Flow: 83.3l/s Max Head: 43.6m	Downloads se-pump-data-booklet_
SE/SL Submersible Grundfos SE/SL sewage pumps (9-30 kW) are fitted with either S-tubeÂ® or SuperVortex impeller (SLV). The free passage through the pump varies from 75-125 mm depending on size.	Specification S-tube and Super Vortex	Flow & Head Max Flow: 225l/s Max Head: 78m	Downloads se-sl-pumps

Fill out the form to submit your bespoke requirements.

Grundfos – Submersible/Sump Pumps

1. Tell us about your Pump System

Grundfos Submersible & Sump Pumps Range

UNILIFT CC

Specification

Flow & Head

Downloads

UNILIFT KP

Specification

Flow & Head

Downloads

AP

Specification

Flow & Head

Downloads

UNILIFT AP12

Specification

Flow & Head

Downloads

UNILIFT AP35

Specification

Flow & Head

Downloads

UNILIFT AP35B

Specification

Flow & Head

Downloads

UNILIFT AP50

Specification

Flow & Head

Downloads

UNILIFT AP50B

Specification

Flow & Head

Downloads

SEG

Specification

Flow & Head

Downloads

DP

Specification

Flow & Head

Downloads

EF

Specification

Flow & Head

Downloads

SL

Specification

Flow & Head

Downloads

SE

Specification

Flow & Head

Downloads

SE/SL

Specification

Flow & Head

Downloads