September 27, 2022
Share this postUnderstanding Pressure Conversion Rates
Working within the pump industry, we often come across a range of different units used to measure the pressure or duty of a pump. However, we understand that understanding these measurements can be a challenge. To make this a little bit easier for our customers, we’re sharing a quick breakdown. Check it out!
Below we have set out the most common units of measurement we come across:
- 1 bar = 100kpa
- 1 bar = 14.5psi
- 1 bar = 10 metres head
- 1 bar = 33 feet head
- 1 metres head = 10kpa
- 1 metre = 3.3ft
- 1 metres head = 0.1 bar
- Let’s take a look at an example which would put these measurements into practice.
For instance, let’s say you’re dealing with a pipeline that needs to lift the water up by 20m. Without taking into account any friction loss, the pump would have to produce a minimum of 2 bars to simply discharge the water at the other end.
Alternatively, if you are replacing a pump with a duty of 120 kpa, the new pump would need to have a required head of 12 metres or 1.2 bar.We hope that makes sense. To access more guidance around pump use and operation, visit our blog or learning resources section
Dura Pump: Performance Under Pressure
As the UK’s leading experts in pump systems, you can call on Dura Pump to specify the perfect solution for your unique operational needs. To get started, view our full range of products or contact a member of our sales team for some impartial and expert advice.
Want to stay up-to-date with the latest news?
Subscribe to our mailing list to hear the latest news, events, free resources, and more for your industry.
Delivering Certainty for Critical Buildings
Whatever the challenge, talk to our team about keeping your critical pump systems reliable, efficient and ready when you need them.
