Flamco Flexfiller Pressurisation Unit Range

The Flamco Flexfiller is a compact, floor-standing digital pressurisation unit designed for automated water top-up in sealed heating and cooling systems. This Flamco pressurisation unit uses an electronic pressure transducer and an internal 18 litre break tank, with single and twin pump configurations available for industrial, commercial and large domestic applications. The range can support system volumes of up to 300,000 litres and provides Fluid Protection Category 5.

How Does a Flamco Pressurisation Unit Work?

The Flamco Flexfiller monitors system pressure using an electronic pressure transducer. If the pressure falls below the required level, the unit automatically tops up the system from its internal break tank until the required pressure is restored. This makes the Flamco Flexfiller suitable for sealed heating and cooling systems where controlled water top-up is required.

• Flamco Flexfiller Instruction Manual
• Flamco Flexfiller Product Sheet
• Flamco Flexfiller Product Data Sheet

When you choose a top brand like Flamco, you expect top quality products. Flamco work to the principle that prevention is better than cure in the quest for zero malfunctions.

Flamco produce a wide range of expansion vessels and pressurisation sets.

Flamco vessels are suitable for potable, chilled and heated water systems. Also, for use in closed central heating and air-conditioning installations and cooling installations. All of the flamco expansion vessels are made from steel, making them some of the highest quality and reliable vessels. They have sizes ranging from just 2 litres up to 8,000 litres, making almost any size or type system apposite and compatible with a vessel.

Below are a few more benefits and features:

• The clamping ring construction clamps the diaphragm between the two vessel halves.
• Nitrogen gas filling for longer pre-pressure maintenance.
• Ribs on the diaphragm prevent sticking to the vessel wall and guarantee inflow of expansion water at the slightest pressure increase.
• Uncoated threaded nipple ensures a trouble-free connection.
• High quality steel.

Flamco pressurisation units are compact and fully enclosed, using an electronic pressure transducer to monitor system pressure and control top-up. The Flexfiller’s digital controls include password protection, pressure settings in 0.1 bar increments, flood protection and event logging, helping operators monitor performance and maintain the required system pressure.

Below are a few more benefits and features:

• Password protected.
• Sequential Programming Menu.
• Pressure Setting in 0.1 bar increments.
• Option of a Pump Pulse
• Flood Protection, through a Pump Runtime Limiter and Excessive Start Alarm.
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interruption.